LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 15 Engine - Cylinder head, Valvetrain >> Valve gear, servicing >> Valve seats, reworking >> Notes

Valve seats, reworking: Notes

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and equipment 

NOTE:
  • When repairing engines with leaking valves, it is not sufficient to rework or replace valve seats and valves. It is also necessary to check the valve guides for wear. This particularly important on high mileage engines.
  • The valve seats should only be reworked just enough to produce a perfect seating pattern. The maximum permissible reworking dimension must be calculated before reworking begins. If the reworking dimension is exceeded, the function of the hydraulic lifters can no longer be guaranteed and the cylinder head should be replaced.
scientia non olet · About LEMON Manuals