LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 15 Engine - Cylinder head, Valvetrain >> Valve gear, servicing >> Assembly overview >> Reworking cylinder head sealing surface

Reworking cylinder head sealing surface

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Reworking cylinder head sealing surface
GW00000100Courtesy of VOLKSWAGEN UNITED STATES, INC.

Cylinder head reworking dimension:

a = At least 132.6 mm

NOTE: When the sealing surface has been reworked, the valves must be set deeper by the same amount.
scientia non olet · About LEMON Manuals