LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 15 Engine - Cylinder head, Valvetrain >> Cylinder head, removing and installing >> Assembly overview >> Checking cylinder head for distortion

Checking cylinder head for distortion

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking cylinder head for distortion
GW00000061Courtesy of VOLKSWAGEN UNITED STATES, INC.

Max. permissible distortion: 0.1 mm (minimum distance between linear measurements: 100 mm)

scientia non olet · About LEMON Manuals