Installation position of bearing shells
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Bearing shell -1- with oil channel (arrow) for connecting rod.
Bearing shell -2- without oil channel connecting rod bearing cap.
- Insert bearing shells and connecting rod bearing cap centrally.
Dimension -a- must be same on both left and right side. Deviation: 0.2 mm.