LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 13 Engine - Crankshaft, Cylinder block >> Piston and connecting rod, disassembling and assembling >> Assembly overview >> Checking cylinder bores

Checking cylinder bores

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Cylinder Bores
GW00000056Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and equipment 

Deviation from nominal dimension: max. 0.08 mm

NOTE: Measuring of the cylinder bores must not be done when the cylinder block is mounted on a repair stand with adapter bracket VW 540, as incorrect measurements would then be possible.
scientia non olet · About LEMON Manuals