LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 10 Engine - Assembly >> Engine, removing and installing >> Assembly mounting

Assembly mounting

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Tightening torques 

Fig 1: Identifying Engine Mounting Bracket & Bolts
GW00000016Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine mounting

1 - Bracket to body 1) 40 Nm plus 90 ° (1/4 turn)
2 - Mounting/bracket to body 25 Nm
3 - Mounting to body 100 Nm

1) Replace bolts

Fig 2: Identifying Transmission Mounting Bracket & Bolts
GW00000017Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission mounting

1 - Mounting to body 1) 40 Nm plus 90 ° (1/4 turn)
2 - Mounting to body 25 Nm
3 - Mounting to transmission bracket 100Nm

1) Replace bolts

Fig 3: Identifying Pendulum Support & Bolts
GW00000018Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pendulum support

1 - Pendulum support to transmission 40 Nm plus 90 ° (1/4 turn)
2 - Pendulum support to transmission 40 Nm plus 90 ° (1/4 turn)
3 - Pendulum support to subframe 20 Nm plus 90 ° (1/4 turn)
scientia non olet · About LEMON Manuals