Turbocharger, removing and installing (engine code AAZ): Installing

WARNING: This page is about a different car, the 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

When installing observe the following:

Install turbocharger and tighten exhaust pipe mounting nuts so that turbocharger can still be moved slightly.
Install 3 mounting bolts and tighten fully, then tighten exhaust pipe nuts.
Before attaching oil supply line, fill turbocharger connections with engine oil.
CAUTION: After installing the turbocharger, let engine idle for approx. 1 minute. DO NOT rev-up the engine at first! (This ensures that the turbocharger is properly lubricated.)