LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Fuel Supply - 1.9L 4-CYL. 2V TDI - AAZ, 1Z, AHU (A3 Platform)) >> Fuel supply system components, removing and installing >> Accelerator pedal linkage, servicing >> Adjusting Accelerator Cable

Adjusting Accelerator Cable

WARNING: This page is about a different car, the 1999 Volkswagen Jetta, 1996 Volkswagen Passat, and 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Adjust cable with the accelerator pedal in the Wide Open Throttle (WOT) position by moving the securing clip (arrow) on the outer cable grooves.

The accelerator pedal is properly adjusted when the injection pump lever just contacts stop and is not stressed.

Fig 1: Adjusting Accelerator Cable (Engine Code AAZ)
G03364920