LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (2.0L - Cooling System - Engine Code(S): CBFA & CCTA (Sedan) (A5 Platform)) >> 19 Cooling System >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor with a Clip

Engine Coolant Temperature (ECT) Sensor with a Clip

WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Engine Coolant Temperature Sensor G62 Electrical Connector
GWWA19-10459Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1- from the ECT sensor.

-- Remove the ECT sensor -2-, to do so, press the latches -arrow-.

NOTE:

Install the new ECT sensor with O-ring as quickly as possible to prevent coolant from leaking out.

scientia non olet · About LEMON Manuals