Brake Booster Vacuum Pump: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Place a new gasket -2- onto the vacuum pump.

Fig 1: Identifying New Gasket On Placed On Vacuum Pump

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place the vacuum pump coupling plate -3- so that it engages into the symmetrical groove of the double sprocket -1- -arrows- when installing the vacuum pump.

-- Tighten the bolts.

The rest of the installation follows the reverse of the removal procedure.

-- Install the battery tray and battery. Refer to Removal and Installation .