Clean Working Conditions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
When working on the fuel supply/injection system, pay careful attention to the following "5 rules" of cleanliness:
- Thoroughly clean all connections and the surrounding area before disconnecting.
- Place parts that have been removed on a clean surface and cover them. Use lint free cloths.
- Carefully cover or seal opened components, if repairs are not performed immediately.
- Only install clean components: Only unpack replacement parts immediately prior to installation. Do not use parts that have been stored loose (for example, in a tool box, etc.).
- When the system is open: Avoid working with compressed air if possible. Do not move the vehicle unless absolutely necessary.