Engine Cover

WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the engine cover in the -direction of the arrows-.

Fig 1: View Of Removing Engine Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

-- Make sure the rubber grommets fit correctly into the mounts when installing.

Fig 2: Identifying Correct Installation Of Rubber Insulators

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully press the engine cover onto the ball studs.

NOTE:

To prevent damage, do not hit the engine cover with a fist or tools.