Camshaft Axial Clearance, Checking
WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Dial Gauge Holder VW 387
- Dial Gauge 0-10 mm VAS 6079
Test Sequence:
Fig 1: Identifying Dial Gauge VAS 6079 Secured To Cylinder Head With Universal Dial Gauge Holder VW 387
-- Perform the test with cylinder head cover removed.
-- Place the camshaft to be checked in the cylinder head.
-- Secure the dial gauge 0-10 mm VAS 6079 to the cylinder head using the dial gauge holder VW 387.
-- Press the camshaft again the dial gauge by hand.
-- Set the dial gauge to "0".
-- Push the camshaft off the dial gauge and read the value:
- Axial clearance: 0.05 to 0.17 mm.