LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (1.9L - Cylinder Head, VALVETRAIN - Engine Code(S): BKC, BLS, BRM & BXE (A5 Platform)) >> 15 Engine - Cylinder Head, VALVETRAIN >> Removal And Installation >> Toothed Belt >> Notes

Toothed Belt: Notes

WARNING: This page is about a different car, the 2006 Volkswagen Jetta and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

From 06.05 a revised engine mount bracket is being installed, which no longer requires that the engine mount bracket be removed and the engine be supported "Toothed Belt, Removing and Installing, Tensioning".

-- Determine which engine mount bracket is installed in the vehicle.

-1- : engine mount bracket through 05.05 (removal required) TOOTHED BELT, THROUGH 05.05 .

-2- : engine mount bracket from 06.05 (removal not required) TOOTHED BELT, FROM 06.05 .

Fig 1: Identifying Engine Mount Brackets -1 And 2-
GWWA13-10363Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.