Steering wheel, removing and installing: Installing

• Place steering wheel - 1  - onto steering column.
• The center markings on the steering wheel and steering column must align.
• The coil connector mounting and pin must be positioned in the opening provided at the base of the steering wheel.
• Fasten steering wheel with bolt - 2  - ; torque is 55 Nm.

• Mark bolt with punch indentation after each loosening procedure.

Fig 1: Steering Wheel Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• If five punch indentations are on the bolt, it must be replaced with a new one.

Fig 2: Steering Wheel Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.