LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 15 Engine - Cylinder head, Valvetrain >> Cylinder head, removing and installing >> Cylinder head, removing and installing >> Overview

Cylinder head, removing and installing: Overview

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Checking compression. Refer to Compression pressures, checking 

NOTE:
  • When installing an exchange cylinder head with camshaft, lubricate running contact surfaces between hydraulic lifters and camshaft cam surfaces before installing cylinder head cover.
  • The plastic packing pieces for protecting the open valves must not be removed until immediately before installing the cylinder head.
  • If the cylinder head is replaced, all the coolant in the system must also be replaced.
  • Removing and installing intake manifold. Refer to Intake manifold upper part, removing and installing  
scientia non olet · About LEMON Manuals