Adjustment Overview

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When performing repairs on the transmission, readjustment of the output shaft for 1st to 4th gears, output shaft for 5th/6th gear and reverse gears or differential is only required if components, which have a direct influence on transmission adjustment, have been replaced. Refer to the table to avoid any unnecessary adjusting.

		to be adjusted:
		Output shaft, 1st to 4th gears. Refer to OUTPUT SHAFT, 1ST TO 4TH GEARS, ADJUSTING .	Output shaft, 5th, 6th and reverse gears. Refer to OUTPUT SHAFT, 5TH, 6TH AND REVERSE GEARS, ADJUSTING .	Differential, refer to DIFFERENTIAL, ADJUSTING .
Replaced part:	Transmission housing	x	x	x
	Clutch housing	x	x	x
	Output shaft, 1st to 4th gears	x
	Output shaft, 5th, 6th and reverse gears		x
	Differential housing			x
	Output shaft tapered roller bearing, 1st to 4th gears	x
	Output shaft tapered roller bearing, 5th, 6th and reverse gears		x
	Differential tapered roller bearing			x