Special Tools

WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Micrometer 75-100 mm VAS 6071
Cylinder Gauge VAS 6078
Guide Sleeve T20097
Dial Gauge Holder VW 387

Fig 1: Identifying Dial Gauge Holder VW 387
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Dial Gauge 0-10 mm VAS 6079

Fig 2: Identifying Dial Gauge VAS 6079
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench (40-200 Nm) V.A.G 1332

Fig 3: Identifying Torque Wrench 40-200 Nm VAG 1332
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Counter Hold Tool T10355

Fig 4: Identifying Counter Hold Tool -T10355-
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Flywheel Retainer 3067

Fig 5: Identifying 3067 Counter-Hold Tool
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 6: Identifying Engine Support Bridge And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Engine Support Bridge 10-222 A
Bracket with Spindle and Hook 10-222 A/10
Shackle 10-222 A/12
Adapter 10-222 A/13
Locking Pin T10060 A
Torque Wrench (5-50 Nm) V.A.G 1331

Fig 7: Identifying Centering Mandrel 3176 And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Centering Mandrel 3176
Drift VW 207 C
Puller, for example, Kukko Extractor 14.5-18.5 mm 21/2
Puller T10055