Cylinder Head Gasket Identification

WARNING: This page is about a different car, the 2010 Volkswagen Jetta and 2009 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cylinder Head Gasket Identification

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Part number = -arrow 1-
Control code = -arrow 2- (ignore this!)
Holes = -arrow 3-
Installed position: the mark faces up.

NOTE:

Depending on piston projection, varying cylinder head gasket thicknesses can be installed. When replacing the gasket, install a new gasket with the same identification -arrow 3-.