Transmission, Transporting And Securing To Assembly Stand

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Always secure heavy parts when transporting.

Remember there is fluid in the transmission. Do not turn the transmission with the vents facing downward when transporting or when it is on the assembly stand. The fluid will leak out.

NOTE:

Remove the bleed caps if necessary and use oil-tight plugs.

Transmission, Transporting

Fig 1: Identifying Engine Sling 2024 A Connected To Engine

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use appropriate lifting tools, for example part of the engine sling 2024 A and shackle 10-222 A/12 (not illustrated).

The transmission can also be lifted using the transmission support jig 3336.

Fig 2: Identifying Transmission Support Jig 3336 Connected To Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Example: secure the transmission to on the bracket.

Fig 3: Identifying Front Wheel Drive Transmission Secured To Assembly Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.