Headlights, assembly
NOTE:
After performing any repairs or service that could affect headlight aim, check/adjust aim. See HEADLIGHTS, ADJUSTING .
NOTE:
The following list refers to Fig 1.
- Sealing cap
- Turn Signal bulb holder
- Headlight beam adjusting motor
- Where applicable
- Removing and installing. See HEADLIGHT BEAM ADJUSTING MOTOR, REMOVING AND INSTALLING .
- Turn Signal bulb -M5- / -M7-
Bulb 12 V, 21 W
- Replacing. See HEADLIGHT BULBS - TURN SIGNALS, REPLACING .
- Fog Light bulb -L22- / -L23-
Bulb H3, 12 V, 55 W
- Where applicable
- Replacing. See HEADLIGHT BULBS - FOG LIGHTS, REPLACING .
- Low Beam bulb -M29- / -M31-
Bulb H7, 12 V, 55 W
- Replacing. See HEADLIGHT BULBS - LOW BEAM, REPLACING .
- Spring clip
- Headlight housing
- Adjusting headlights. See HEADLIGHTS, ADJUSTING .
- Removing and installing. See HEADLIGHTS, REMOVING AND INSTALLING .
- Servicing upper housing securing lugs. See HEADLIGHT SECURING LUGS, SERVICING .
- Spring clip
- High Beam bulb -M30- / -M32-
Bulb H1, 12 V, 55 W
- Replacing. See HEADLIGHT BULBS - HIGH BEAM, REPLACING .
- Parking Light bulb -M1- / -M3-
Bulb 12 V, 5 W
- Replacing. See HEADLIGHT BULBS - PARKING LIGHTS, REPLACING .
- Parking light bulb holder