Wheel bearing, pulling out

• Remove circlip.

Fig 1: Pulling Out Wheel Bearing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Install press piece - 1  - with shoulder to bearing, press sleeve - 2  - with four stepped internal diameters to wheel bearing housing, piston cylinder - 3  - with pull rod and special nut - 4  -.
• Operate pump and remove the wheel bearing.

1 - Press piece E-5

2 - Press sleeve E-65-1

3 - Piston cylinder HKZ-15

4 - Special nut E-8-214 and pull rod