Bleeding brake system without brake filling and bleeding appliance
WARNING: This page is about a different variant/trim than selected.
- Build-up brake pressure in brake system by pumping the brake pedal.
- Attach bleeder bottle hose and open bleeder screw.
- With brake pedal held down, close bleeder screw.
- Repeat operation until no air is present.
Bleeding sequence ABS Mark 60. Refer to Bleeding sequence
Pre-bleed the brake system when at least one chamber in the brake fluid reservoir is completely empty (e.g. leaks in braking system).
Pre-bleeding sequence. Refer to Pre-bleeding sequence
Changing brake fluid
Refer to BRAKE FLUID, CHANGING (every 2 years)