LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (4 SPD. Automatic Transmission 01M (A4 Platform)) >> 39 Final drive, Differential >> Final drive, disassembling and assembling >> Drive pinion, removing and installing >> Removing and installing bearing supporting ring

Removing and installing bearing supporting ring

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing And Installing Bearing Supporting Ring Using Special Tool 3183A & Torque Wrench
GW00002290Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Torque wrench

scientia non olet · About LEMON Manuals