Differential, adjusting

WARNING: This page is about a different variant/trim than selected.

Special tools and equipment required

3155 Ring nut spanner

Fig 1: 3155 Ring Nut Spanner
Courtesy of VOLKSWAGEN UNITED STATES, INC.

V.A.G 1332 Torque wrench or equivalent

Fig 2: Torque Wrench V.A.G. 1332 (40 To 200 Nm)
Courtesy of VOLKSWAGEN UNITED STATES, INC.

Tighten bearing body with 3155 to 150 Nm up to stop and secure.

Fig 3: Identifying Special Tool 3155 On Bearing Body
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Tighten adjusting ring to 50 Nm and mark.
Turn adjusting ring on by five locking tabs and secure so that preload of tapered roller bearings is set.