Vehicle diagnosis, testing and information system VAS 5051, connecting

Special tools and equipment 

• VAS 5051 Vehicle diagnosis, testing and information system

Fig 1: VAS 5051 Connected To Data Link Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Connect diagnostic cable connector to Data Link Connector (DLC).
• With ignition switched off, connect tester VAS 5051 to DLC using diagnosis cable VAS 5051/1 or VAS 5051/3.

Fig 2: Special Tool - VAS 5051 & On Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Switch on tester (arrow).

• Switch on ignition.
• Select zone "Vehicle self-diagnosis" on touch screen.

Refer to 01 ON BOARD DIAGNOSTIC (OBD)