ATF, replacing

WARNING: This page is about a different variant/trim than selected.

Remove sound insulation tray.
Remove sound insulation from left longitudinal member.
Place container under transmission.

Fig 1: ATF Level Plug

GW00002155

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove ATF level plug from oil pan.
Remove overflow pipe through level hole.
Drain ATF.
Install overflow pipe.

Screw level plug in hand-tight.
Fill with 3 liters of ATF through filler pipe using V.A.G 1924.

Start engine and shift through all selector lever positions with vehicle stationary.
Check and top up ATF level. Refer to ATF level, checking and topping up .