List of selectable functions
WARNING: This page is about a different variant/trim than selected.
| Reference | ||
| 01 - | Check control module version. Refer to Performing On Board Diagnostic (OBD) | VAG 1551 Scan Tool, connecting and selecting functions |
| 02 - | Check Diagnostic Trouble Code (DTC) memory | Diagnostic Trouble Code (DTC) memory, checking |
| 04 - | Initiate basic setting | Basic setting, initiating |
| 05 - | Erase DTC memory | Diagnostic Trouble Code (DTC) memory, erasing |
| 06 - | Ending output | Ending Output |
| 08 - | Read measured value block | Measured value block, reading |
Further functions, which are printed out by pressing the HELP button, need not be considered.
The VAG 1551 Scan Tool returns to the following start position after checking each function:
Indicated on display
| Rapid data transfer HELP Select function XX |