Technical data, spark plugs
WARNING: This page is about a different variant/trim than selected.
| Engine code | AFP | |
| Firing order | 1-5-3-6-2-4 | |
| Spark plugs * See note | ||
| VW | 101 000 035 AH | |
| Manufacturers designation | BKR 5 EKUP | |
| Electrode gap | max. 0.7 mm * See note | |
| Tightening torque | 25 Nm | |
* Use tool T10029 to remove and install spark plug connector. Remove and install spark plugs using spark plug spanner 3122B
* Gap between Ground electrode and center electrode insulation