Display group 46 (oxygen sensor control) Catalyst diagnostic (conversion test)
WARNING: This page is about a different variant/trim than selected.
Readiness code
| Display group 46 (oxygen sensor control) Catalyst diagnostic (conversion test) | ||||||
|
||||||
|
||||||
| Read Measuring Value Block 46 | → | Indicated on display | ||||
| xxxx RPM | xxxx ° C | x.xx | Text | |||
| 1 | 2 | 3 | 4 | Display zones | Specification | Evaluation |
| Result of catalyst conversion test (Test OFF/test ON/Cat B1 OK/Cat B1 n.OK) | Cat B1 OK | --- | ||||
| Amplitude ratio | 0.00 to 0.32 | --- | ||||
| Catalyst temperature | min. 440 ° C | --- | ||||
| Engine speed | 1800 to 2200 rpm | --- | ||||