LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Measuring Value Block >> Measuring value blocks, evaluating display groups 30 to 49, 99, 107 (oxygen sensor control) >> Display group 30 (oxygen sensor control)

Display group 30 (oxygen sensor control)

WARNING: This page is about a different variant/trim than selected.
Display group 30 (oxygen sensor control)
  • Engine running at idling speed
Read Measuring Value Block 30 → Indicated on display    
xxx xxx          
1 2 3 4 Display zones Specification Evaluation
             
           
    Oxygen sensor control status after catalyst 110  
  Oxygen sensor control status before catalyst 111  
NOTE:
  • For display zones 2:
  • The 3rd display position is not set to 1 until in part throttle range.
scientia non olet · About LEMON Manuals