Evaporative emissions system components, repairing

1 - O-Ring

• Replace if damaged

2 - Vent line

• Black
• Make sure tight fit
• Press release tabs on connecting piece to remove from flange

3 - Vent line

• White
• Make sure of tight fit
• Press release tabs on connecting piece to remove from flange

4 - Retaining screw

5 - Discharge hose

• Make sure of tight fit

6 - Connector

• Black, 3-way

7 - Vacuum line

8 - Leak Detection Pump (LDP) V144

• Checking, refer to Leak Detection Pump (LDP) V144 , checking 

9 - Air filter for leak detection pump

10 - Intake hose

• Make sure tight fit tight fit

11 - Mounting plate

• Clipped onto EVAP canister

12 - 10 Nm

13 - EVAP canister

• In right rear wheel housing underneath liner
• Fastened to body