EVAP system, checking using KLI 9210 tester: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools, testers and auxiliary items required
- diagnostic tester VAS 5051 or diagnostic tester VAS 5052
- Evaporative Emissions Tester KLI 9210 DLX (set to 14 in. H 2 O)
- Light source (for viewing smoke)
- Hose clamps, up to dia 25 mm 3094 or equivalent
Using the Evaporative Emissions Tester KLI 9210 DLX KLI9210 Tester operating instructions