Main radiator

WARNING: This page is about a different variant/trim than selected.

Auxiliary radiator

Removing

Drain coolant, refer to Coolant, draining and filling .
Remove front bumper: Refer to FRONT BUMPER
Pull quick-coupler off radiator.
Disconnect connectors from thermal switch and coolant fans.

Place lock carrier into service position: Refer to LOCK CARRIER SERVICE POSITION
Remove radiator retaining screws and remove radiator and fan from below.

NOTE:

For vehicles with air conditioning.

Installing

Installation is in reverse order, but note the following:

Fill with coolant, refer to Coolant, draining and filling .