Camshafts, removing and installing: Removing

Fig 1: Crankshaft Aligned With TDC Cyl. 1 Position

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Turn camshaft in engine turning direction to marker TDC cyl. 1 - arrow  - at vibration damper retainer bolt.
• Remove ignition coil N152.
• Remove camshaft roller chain tensioner.
• Remove cover.

• Loosen fastening screws at camshaft sprockets.

Fig 2: Identifying Counterhold Area On Camshaft

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove camshaft sprockets.

Fig 3: Camshaft Cylinder Row Assignments

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Camshaft, cylinder row 1, 3 and 5 

• Remove bearing covers 1 and 7 first.
• Loosen bearing covers 3 and 5 in an alternating and crosswise pattern.

Camshaft, cylinder row 2, 4 and 6 

• Remove bearing cover 4 first.
• Loosen bearing covers 2 and 6 in an alternating and crosswise pattern.