LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (2.8L - Engine Mechanical - AFP (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Sealing flange and flywheel/drive plate, removing and installing >> Oil seal on vibration damper end of crankshaft, replacing >> Notes

Oil seal on vibration damper end of crankshaft, replacing: Notes

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Special Tools - Oil Seal On Vibration Damper End Of Crankshaft, Replacing
GW00000810Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required