LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (2.8L - Engine Mechanical - AFP (A4 Platform)) >> 10 - Engine - Assembly >> Engine, removing and installing >> Tightening torques

Tightening torques

WARNING: This page is about a different variant/trim than selected.
Connection   Torque
Bolts, Nuts M 6 10 Nm
  M 8 20 Nm
  M10 45 Nm
  M 12 60 Nm
Except the following:    
Assembly support on transmission mount * See note   60 Nm plus 1 / 4 turn (90 ° )
Assembly support on engine mount * See note   60 Nm plus 1 / 4 turn (90 ° )
Assembly support on body * See note   40 Nm plus 1 / 4 turn (90 ° )
Rocker bearing on transmission * See note   40 Nm plus 1 / 4 turn (90 ° )
Rocker bearing on assembly carrier * See note   20 Nm plus 1 / 4 turn (90 ° )

* Expansion bolts, replace