LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (2.8L - Engine Mechanical - AFP (A4 Platform)) >> 10 - Engine - Assembly >> Engine, removing and installing >> Engine and transmission mounts >> Tightening torques

Tightening torques

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Engine Mounting Bracket & Bolts
GW00000016Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine Assembly

  1. 40 Nm plus 1 / 4 turn (90 )
  2. 25 Nm
  3. 60 Nm plus 1 / 4 turn (90 )

* Replace bolts

Fig 2: Identifying Transmission Mounting Bracket & Bolts
GW00000017Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission assembly

  1. 40 Nm plus 1 / 4 turn (90 )
  2. 25 Nm
  3. 60 Nm plus 1 / 4 turn (90 )

*Replace bolts

Fig 3: Identifying Pendulum Support & Bolts
GW00000018Courtesy of VOLKSWAGEN UNITED STATES, INC.

Rocker bearing

NOTE:
  • The bolts must not be reused.
  1. 40 Nm plus 1 / 4 turn (90 )
  2. 40 Nm plus 1 / 4 turn (90 )
  3. 20 Nm plus 1 / 4 turn (90 )
scientia non olet · About LEMON Manuals