Charge Air Pressure Sensor G31 , checking: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools, testers and auxiliary items required
- Multimeter V.A.G 1526A or Multimeter V.A.G 1526C
- Connector Test Set V.A.G 1594A or Connector Test Set V.A.G 1594C
- Adapter cable, 121-pin V.A.G 1598/31
- Wiring diagram
Test conditions
- A malfunction in charge air pressure sensor was detected by On Board Diagnostic (OBD).
- Ignition switched off.