Cooling system components (on body), assembly overview

1 - Radiator

• Removing and installing, refer to Radiator, removing and installing 
• After replacing replace entire amount of coolant

2 - O-ring

• Replace if damaged

3 - Upper coolant hose

• Secured to radiator with a retaining clip
• Ensure seated tightly
• Coolant hose connection diagram, refer to Coolant hose connection diagram 

4 - Air shroud

5 - 10 Nm

6 - Auxiliary fan

• Only vehicles with optional equipment

7 - Fan ring

8 - Retaining clip

• Check for secure seat

9 - Connector

10 - Radiator fan

11 - Bracket

• For fan connector

12 - Lower coolant hose

• Secured to radiator with a retaining clip
• Ensure seated tightly
• Coolant hose connection diagram, refer to Coolant hose connection diagram 

13 - O-ring

• Replace

14 - Coolant fan control (FC) thermal switch F18 , 35 Nm

• For electric fan
• Switch temperatures:
• 1st stage on: 92 to 97 ° C, off: 84 to 91 ° C
• 2nd stage on: 99 to 105, off: 91 to 98 ° C

15 - Bracket

• For radiator
• Note installation position

16 - 15 Nm