LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (1.8L - Engine Mechanical, Engine Code(S): AWD, AWW, AWP (A4 Platform)) >> 15 - Engine - Cylinder head, Valvetrain >> Valvetrain >> Valve seats, refacing >> Refacing exhaust valve seat

Refacing exhaust valve seat

WARNING: This page is about a different variant/trim than selected.
Dimension   Intake valve seat
Dia. a mm 29,0
b mm max. perm. refacing dimension * See note
c mm approx. 1.8
Z   Cylinder head lower edge
α   45 ° valve seat angle
β   30 ° upper correction angle
γ   60 ° lower correction angle

* Calculating maximum permissible refacing dimension The maximum permissible refacing dimension is calculated as follows:  under Valve seats, refacing  .

scientia non olet · About LEMON Manuals