LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (1.9L - TDI Engine Mechanical - ALH (A4 Platform)) >> 26 - Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Exhaust system components, removing and installing

Exhaust system components, removing and installing

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Removing and installing exhaust manifold. Refer to Turbocharger with attachments  .
  • After exhaust system repairs, make sure exhaust system is not under stress and that it has sufficient clearance from the bodywork. If necessary, loosen double clamps and clamp and align exhaust pipe so that sufficient clearance is maintained to the bodywork and support rings carry uniform loads.
  • Replace self-locking nuts.
scientia non olet · About LEMON Manuals