Oil supply line, disassembly and assembly

Fig 1: Exploded View Of Lubrication System Components -- Part III

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing

• Remove noise insulation.
• Place drip tray V.A.G 1306 beneath.
• Remove air filter housing.
• Remove union nut - 2  - and banjo bolt - 4  - on oil filter bracket.
• Remove bolt - 6  -.
• Remove union nut - 2  - at turbocharger.
• Remove bolt - 9  - from bracket - 7  -.
• Remove nut - 8  - and remove bracket - 7  -.
• Remove oil supply line - 1  -.

Installing 

Fig 2: Exploded View Of Lubrication System Components -- Part III

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installation is in reverse order. Note the following:

• Loosely fasten bracket - 7  - with nut - 8  - to exhaust manifold.
• Hand-tighten union nut - 2  - and banjo bolt - 4  - to oil filter bracket.
• Hand-tighten union nut - 2  - to turbocharger.
• Tighten union nut - 2  - and banjo bolt - 4  - on oil filter bracket to specified torque.

• Tighten union nut - 2  - on turbocharger to specified torque.

Fig 3: Exploded View Of Lubrication System Components -- Part III

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Position clamp - 5  - on oil supply line.
• Tighten bolts - 6  - and - 9  - to specified torque.
• Tighten nut - 8  - to specified torque.