LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (1.9L - TDI Engine Mechanical - ALH (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Sealing flanges and pressure plate/flywheel/drive plate, removing and installing >> Crankshaft seal (ribbed belt side), replacing >> Installing PTFE-version sealing ring

Installing PTFE-version sealing ring

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Do not oil or grease the sealing lip of the sealing ring.
Fig 1: Identifying Guide Sleeve From Assembly Tool T10053 & Crankshaft Journal
GW00000307Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Pressing Oil Seal Using Assembly Tool T10053 And Bolt T10053/2
GW00000308Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals