Diagnostic mode 9: Vehicle information (Vehicles with engine code AVH, AZG): Procedure
WARNING: This page is about a different variant/trim than selected.
- Connect diagnostic tester, see CONNECT DIAGNOSTIC TESTER .
- Switch ignition on.
- Under address word 33, select "Diagnostic mode 9: vehicle information".
- Select desired vehicle information "Test -ID XX".
Display vehicle information
DIAGNOSTIC MODE 9: VEHICLE INFORMATION (ENGINE CODE AVH, AZG)
| Test-ID | Diagnostic text |
|---|---|
| 04: | Calibration identification e.g.:
|
| 06: | CVN (control module -check sum) e.g.:
|
- End diagnosis and switch ignition off.