Diagnostic mode 6: Check test results of components that are not continuously monitored: Function

WARNING: This page is about a different variant/trim than selected.

This diagnostic mode displays the test results of emission relevant components and systems which are not continuously monitored.

The values of the individual test results must reach the specified value or must be within the min.- and max. - limits.

DIAGNOSTIC MODE 6: CHECK TEST RESULTS OF COMPONENTS THAT ARE NOT CONTINUOUSLY MONITORED

Test-ID	Components	Test
01:	Catalytic converter	See TEST-ID 01: CATALYTIC CONVERTER
03:	Secondary Air Injection (AIR) system	See TEST-ID 03: SECONDARY AIR INJECTION (AIR) SYSTEM
05:	Tank ventilation system	See TEST-ID 05: TANK VENTILATION SYSTEM
09:	Engine Coolant Temperature (ECT) Sensor -G62- Vehicles with engine code AVH, AZG	See TEST-ID 09: ENGINE COOLANT TEMPERATURE (ECT) SENSOR -G62- (VEHICLES WITH ENGINE CODE AVH, AZG)