Vehicle Speed Sensor (VSS) G68 and Intermediate Shaft Speed Sensor G265, Removing And Installing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 Volkswagen Golf, 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2005 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove torque converter housing, refer to Transmission, disassembling and assembling .
Remove bearing and differential cage.
Pull connector off sensor.

- 1 - Vehicle Speed Sensor (VSS) G68

Fig 1: Locating Vehicle Speed Sensor (1) & Intermediate Shaft Speed Sensor (2)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

- 2 - Intermediate Shaft Speed Sensor G265

Remove sensor bolts and remove.

Installing

Insert new sensor and tighten bolts to 8 Nm.

Install remaining parts, refer to Transmission, assembling .