Transmission Input Speed (RPM) Sensor G182, Removing And Installing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 Volkswagen Golf, 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2005 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove cover, refer to TRANSMISSION, DISASSEMBLING AND ASSEMBLING .

Fig 1: Pulling Connector Off Transmission Input Speed (RPM) Sensor G182

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pull connector off Transmission Input Speed (RPM) Sensor G182 - 1 -.

Remove sensor bolts and remove.

Installing

Insert new sensor and tighten bolts to 8 Nm.

Install remaining parts, refer to Transmission, assembling .