Torque Converter, Installing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 Volkswagen Golf, 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2005 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Recesses In ATF Pump Inner Wheel

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The ATF pump is driven by the torque converter - arrows -.

When installing the torque converter, ensure that drive engages in the recesses in ATF pump inner wheel.

Fig 2: Identifying Dimension Between Transmission Housing Flange And Contact Surface Of Stud Bolts Of Torque Converter

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The converter is correctly installed when the value of dimension - a - between o transmission housing flange and contact surface of stud bolts of torque converter is

21 mm in 4-cylinder engines
17 mm in 5 and 6-cylinder engines

It is essential to make sure that dimension - a - is maintained during further assembly. The converter is not allowed to slip forwards.