LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (5 SPD. Automatic Transmission 09A) >> 00 - General, Technical Data >> Repair Instructions >> Repair Instructions >> Sealant

Repair Instructions: Sealant

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 Volkswagen Golf, 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2005 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Thoroughly clean sealing surfaces and apply sealant D 176 404 A2   .

Check expiration date of sealant.

Bolt parts together within 5 minutes after applying sealant.

Leave sealant to dry for approx. 30 minutes after assembly. Only then is ATF allowed to be filled.

Check ATF level after installation and correct level if necessary.